Mini Ice Maker With LCD

Model: HZB-13FIce making capacity: 13kg/24hWarranty: 12 monthCarton size: 331x422x417mmVoltage220-240V/50Hz115V/60HzProduct dimension (mm)287x375x357287x375x357NW (kg)11.811.8GW (kg)13.113.1Ice storage capacity (L)2.22.2Ice basket capacity (kg)1.11.1CLEANING AND MAINTAININGBefore using your ice maker,Website:http://www.hiconcool.com, it is strongly recommended to clean it thoroughly.1. Take out the ice basket.2. Clean the interior with diluted detergent, warm water and a soft cloth.3. Then use the water to rinse the inside parts, and drain out the water from the draining port by unplugging the drain cap on the back.4. The outside of the ice maker should be cleaned regularly with a mild detergent solution and warm water.5. Dry the interior and exterior with a soft cloth.6. When the machine is not in use for a long time, open the water drain cap to drain water completely out from the water reservoir. After using your ice maker for a long time, we also suggest you should clean your unit.Especially to the water separator pipe and the water filters, you must clean them periodically.1. If the water separator pipe is blocked and there is no water flowing down when you listen the compressor and the water pump inside are still working, please turn off the unit first and disassemble this pipe down, and clean it. Clean the each hole on the pipe wall displayed in following picture. After cleaning, install back the water separator pipe and be sure the right terminal of the pipe connect to the silicone pipe well and as original.2. For both of the water tank and the big water reservoir, clean them with diluted detergent, warm water and a soft cloth. Then use the water to rinse the inside, and drain out the water from the draining port by unplugging the drain cap on the back. It will help you keep the unit and ice-cube hygienicly, and also make the unit work normally. 3.When cleaning, if find that the ice cube left on the evaporator and can not be taken out easily, you can turn on the unit to let the unit enter the ice making process, then press "ON/OFF" button for more than 5 seconds to let the unit start ice harvest process to melt the ice cube.It will help you remove the hard ice cube. How to drain out the water from the internal tank and big water reservoir completelyBecause the water in the big water reservoir is stop to drain port by the water value, if you want to drain away all the water, please plug on the unit and but don’t start the unit, then remove the drain port cap at the back. Wait some minutes, all of the water will flow out.