Mould information
1. Design request:vertical and horizontal mould design
2. Mould material:P20,718,NAK80,S136
3. Standard Base:LKM,HASCO,DME
4. Treatment:pretreat and nitriding ,polish
5. Cavity:single or multi
6. Runner:Cold or hot
7. Gate:point ,sub gate
8. Related plastic material:PP,PC,PS,PE,PVC
Technology
1) Mould structure design
Professional designers provide you with reasonably designed mould to shorten cycle hours.
Reducing unnecessary procedure improves efficiency.
2) Mould cooling system
According to the structural characteristics of the product and the appearance of the product , We design a reasonable form of gate for mould, such as a large gate, hidden gate, fan gate, needle gate, pin point gate etc., a reasonable channel of runner design make mold temperature balance in the shortest time to improve mould precision and productivity.
3) Accessory for mould
Slide, guide pin, guide sleeve, lifter blocks and so on are taken by wear-resistant standard parts, to ensure the mould life.
4) Deal with mould
Quenching the mold, heat treatment to improve the hardness, then Nitriding temperature is lower , the mold will no longer need to quench mold with high surface hardness and wear resistance more than HV850 url:http://www.seacomoulds.com