Professional Single Component Structural Silicone Sealant
6636 Professional Single Component Structural Silicone Sealant
6636 Structural Silicone Sealant is a one component, neutral curing,architectural-grade silicone sealant specifically designed for structural glazing application. It requires contact with air as it reacts with atmospheric moisture to cure to a tough and flexible silicone rubber. It can be easily extruded under a wide temperature range. The cured sealant is not affected by sunlight, rain, snow, extreme high and low temperatures.
FEATURES & BENEFITS:
• Meet the technical standards of GB16776
• One component, ready to use
• Neutral curing, non-corrosive
• Excellent mechanical properties
• Excellent high and low temperature resistance after complete curing: -50 ° C to 150 ° C
•Good compatibility with other neutral silicone sealant
APPLICATIONS:
• Structural assembly of glass curtain wall
• Structural assembly of aluminum panel curtain wall
• Structural assembly of metal structure engineering
• Structural assembly of the lighting roof
• Bonding and sealing for wind pressure resistant glass, such as automobiles and ships
• Many other architectural and industrial uses
TECHNICAL STANDARDS:
6636 Structural Silicone Sealant meets or exceeds the test requirements of:
• GB 16776-2005
• ASTM C1184
• ETAG 002
QUALITY ASSURANCE:
• 6636 Structural Silicone Sealant has passed ISO9001/ISO14001 management system certification, and strictly in accordance with ISO9001 quality system requirements for production and control of product quality.
COLOUR:
• Black, gray, white or other colors required by the user
PACKAGING INFORMATION:
• 6636 Structural Silicone Sealant is supplied in 300 ml disposable plastic cartridges, 600 ml foil sausages and 200L drum packaging.
USABLE LIFE AND STORAGE:
• When stored at or below 27°C in the original unopened containers, 6636 Structural Silicone Sealant has a usable life of 12 months from the date of production.
CONSTRUCTION PROJECT TECHNOLOGY SERVICES:
• Drawing review Prior to the application of the 6636 Structural Silicone Sealant, the joint design drawings for the silicone structural sealant must be approved by Hitakol's technician and submitted a written report.
• Bonding test Hitakol will makes the tests through our standard laboratories to assess the bonding properties of our products and materials selected (such as glass, metal, etc.), and submit the results of the experiments, product recommendations and surface cleaning methods to customers in writing.
HOW TO USE:
• Surface preparation Thoroughly clean all substrates to be bonded before using this product to remove all foreign matter and contaminants such as grease, oil, dust, water, frost, surface dirt, old sealants or compounds and protective coatings. Metal, glass and plastic must be cleaned with solvent according to two rag cleaning methods. In all cases, the solvent must be wiped clean with a clean, lint-free cloth. Do not use detergent or soap with water.
• Primer 6636 Structural Silicone Sealant generally does not require a primer. However, if the adhesion test indicates that a primer is required, the primer is applied to the interface with a clean, lint-free cloth before applying the sealant. Apply a thin layer to the surface and allow it to dry. A test must be performed before using the sealant to determine if a primer is required.
APPLYING SEALANT:
• Install gasket material or joint filler material, glass support blocks, gaskets and tape as required by the design. 6636 silicone structural sealant is continuously squeezed into the joint, and the sealant is flattened on the backing material and the joint surface with appropriate force. Tooling must be finished before skin forming. It is recommended to use a convex tool to trim the sealant surface into a concave shape. Do not use soap and water as an auxiliary material for tooling. Remove masking tape as soon as the tooling is finished.
PRECAUTIONS:
• Before using, please read the safety data sheet of this product for information on the safe use of the product.
• Avoid contact with eyes before curing. If contact with eyes, rinse with plenty of water and consult a doctor.
• Pay attention to ventilation in the construction and curing areas
• Uncured products should avoid contact with children
Contact us
Contact: Sandy
Official Website: www.top-aluminium.com
Tel/Fax: +0086-757-85512126
Mobile: +0086-15815922250
Wechat/WhatsApp: +0086-15815922250
E-mail: sandy@topalu.cn
QQ: 1054769359
Company Add.: 4A09,RUIYING COMMERCIAL BLDG.DALI TOWN, NANHAI DIS,FOSHAN CITY, CHINA url:http://www.top-aluminium.com